Because of its high cost performance, A5182-H34 aluminium sheet coil has been used in batches in many industries, such as automotive interior parts, pull ring materials, can tube cover materials, refrigeration devices, electrical enclosures, cabinets, etc.
A5182-H34 aluminium sheet coil for Hard disk drive application has excellent performance
Excellent welding performance
There is no abnormality on the welding surface, and both the tensile test and the bending test are qualified;
The weld penetration is clear, and there is no slag and pores after alkaline washing.
Solder bending test: the welding part bends normally.
Good mechanical stretching effect
The tensile strength of the sample fluctuates slightly
The yield strength is 10-20Mpa lower than that of unwelded samples.
Excellent machining performance
Machining test: Deep processing and continuous stamping are normal, and there is no orange peel or cracks in the bending.
The welding performance of A5182-H34 aluminium sheet coil for Hard disk drive application with gas welding, argon arc welding, spot welding and seam welding is very good. Good machinability. The surface is beautiful after anodization. This kind of alloy has high strength, especially fatigue resistance: high plasticity and corrosion resistance, cannot be strengthened by heat treatment, good plasticity during semi-cold work hardening, low plasticity during cold work hardening, good corrosion resistance, and good weldability. Poor machinability and can be polished. Uses are mainly used for low-load parts that require high plasticity and good weldability and work in liquid or gaseous media.
