1060 1070 aluminum coil tube pipe 4x1 capillary 8 * 1 Spot aluminum tube specifications: outer diameter of round tube 2.0 ~ 500mm, thickness 0.3 ~ 100mm, square tube 5 * 5 ~ 200 * 200mm; rectangular tube: 5 * 10 ~ 50 * 200mm, thickness 0.2 ~ 10.0mm, seamless tube Variable length (about 2.2 meters, 2.5 meters, about 2 meters, about 3 meters, about 1 meter). Aluminum tube classification: seamless tub...

Aluminum tube is a kind of non-ferrous metal tube. It refers to a metal tubular material that is hollowed out along its longitudinal length by pure aluminum or aluminum alloy. Divided by extrusion method: seamless aluminum tube and ordinary extruded tube Extruded aluminum pipe: billet heating hot extrusion sawing turning, boring wool heating secondary extrusion tension correction or roller correcti...

2017 is a typical hard aluminum alloy in the aluminum-copper-magnesium series. Its composition is reasonable and its comprehensive performance is good. This alloy is produced in many countries and is the largest amount of hard aluminum. The characteristics of this alloy are: high strength, certain heat resistance, can be used as working parts below 150 C. Above 125 C, the strength of the 2017 alloy...

5A02 aluminum plate is Al-Mg series rust-proof aluminum alloy, which cannot be strengthened by heat treatment. The magnesium content of this alloy is low, its plasticity is high, its formability is good, its weldability is good, and its strength can be improved by cold deformation. The alloy has good corrosion resistance and is suitable for use in marine environments. Technical Parameters Alloy 5A0...

Hot rolling, cold drawing, hot expansion According to different production methods, it can be divided into hot rolled tubes, cold rolled tubes, cold drawn tubes, extruded tubes and so on. 1.1 Hot-rolled 5083 seamless tubes are generally produced on automatic tube rolling units. The solid pipe blank is inspected and removed for surface defects, cut to the required length, centered on the end face of...