2024 alloy can be used as a working part below 150 C. The strength of the 2024 alloy is higher than that of the 7075 alloy. The forming properties are better in the hot state, annealing and new quenching conditions, and the heat treatment strengthening effect is remarkable, but the heat treatment process is strict. Corrosion resistance is poor, but it can be effectively protected by coating with pu...

7075 which contains zinc and magnesium. The more common aluminum alloy is high in strength, but it cant be welded, and its corrosion resistance is quite poor. Many CNC cutting parts are made of 7075 alloy. Zinc is the main alloying element in this series, and a small amount of magnesium alloy allows the material to be heat treated to very high strength properties. This series of materials is genera...

1. The 6063 seamless aluminum tube has better pressure than the slotted aluminum tube. The seamless aluminum tube has a relatively uniform texture. The welded tube has a small amount of chemical loss in the chemical part of the weld, so the mechanical properties are slightly worse than the seamless tube, but it is not the difference. Very big. Second, if it is used for curved pipe, it is recommende...

6061 aluminum rod stock features: The main alloying elements of the 6061 alloy are magnesium and silicon, and form the Mg2Si phase. If it contains a certain amount of manganese and chromium, it can neutralize the bad effect of iron; sometimes a small amount of copper or zinc is added to increase the strength of the alloy without significantly reducing the corrosion resistance; there is still a smal...

The 3003 aluminum plate belongs to the Al-Mn alloy plate, also known as the anti rust aluminum plate. The aluminum content of 3003 aluminum plate is about 98%, and the proportion of manganese content can reach 1%, because 3003 aluminum plate...