Grade: 4343/3003+Zn/4343 Status: H14 Composite layer (%): 8～12 Thickness (mm): 0.085～0.15 Tolerance (mm): 0.005 Tensile strength b (MPa): 180～220 Elongation (%): 0.5 Yield strength 0.2 (MPa:) 145 Main use: fins The 4343/3003/4343 aluminum alloy brazing foils for heat exchangers were produced by hot-rolling composite process. The coating ratio, microstructure and mechanical properties of alumi...

7a04 aluminum alloy is a cold-treated forged alloy with high strength, far superior to mild steel. 7a04 is one of the commercial high strength alloys. 7a04 aluminum alloy round drawn bar has a compact structure and strong corrosion resistance, which is excellent for aviation and marine plates. Normal corrosion resistance, good mechanical properties and anodic reaction. The fine grains provide bette...

Aluminium flat angle bar is a kind of aluminum profile, which is a long strip of aluminum with two sides perpendicular to each other. There are three main functions. 1. Use as a edging. 2. Use as a ceiling. 3. Use as a fixed accessory. Below, I will explain it to you in detail. 1. Use as a edging. Like many workshop workbenches, it is necessary to use Aluminium flat angle bar for edging, there will...

Introduction to 7A09 aluminum sheet plate in stock The 7A09 aluminum plate belongs to the Al-Zn-Mg-Cu series of super-duralumin. This alloy is an ultra-high-strength deformed aluminum alloy that has been used in the aircraft manufacturing industry tacitly in the 1940s and is still widely used in the aviation industry. 7A09 aluminum sheet plate in stock performance advantage 1. After solution treatm...

5182s supply type, composition, performance, price and typical uses 5182 auto aluminum plate coil is a typical aluminum-magnesium alloy with good processing and forming properties, corrosion resistance and good weldability. 5182 auto aluminum plate coil are used for processing can lids and pull rings, automobile body panels, control panels, reinforcements, brackets, etc. part. Due to the forming pe...